3 ways to deep-clean a gas furnace burner
If you are still one of the people who use a gas stove instead of the modern vitroceramic cooktop, this post is for you. Gas cookers offer a series of advantages over new electric cooking plates.
The flavor of the food is its main differentiation. Many cooks agree that the taste of food is better if we cook it in a gas stove than in a ceramic hob.
The price of this kitchenware is cheaper than electric glass-ceramic hobs. In recent years, the safety of gas cookers has improved a lot compared to previous models, so it is no longer a significant risk.
However, a moment of carelessness and a bit of overturned milk is enough to cause obstructions of the gas burners, after which the flames they produce will be much weaker, reducing their heat and waste the gas.
So that this does not happen, it is essential that you keep these pieces always well-kept. But how do you clean the burners in the kitchen? Continue reading!
When cooking, there are many foods such as milk, rice, water, or other liquid preparations that tend to be thrown over. The spilled content adheres to the burners, blocking their orifices and reducing their efficiency.
Cleaning the burners in the kitchen usually takes a long time, rather than what is needed when cleaning a ceramic hob. Worst still, sometimes, it may not be completely clean despite our troubles.
That’s why today we offer you three ways on how to clean a gas furnace burner thoroughly and efficiently.
How to clean the gas furnace burner with vinegar and baking soda
Vinegar is an ever-present material in the task of cleaning any type of appliance. It is the most natural, ecological and cheap way to leave any device as new.
Therefore, to clean the glass stove, the vinegar is a necessary requirement. This method is very simple. It requires hardly any effort, although it requires a little time.
- A bucket with hot water
- Wine or lemon vinegar
- Sodium bicarbonate.
Steps to clean the burners with vinegar
- Fill a bucket or the sink itself, with hot water, a splash of vinegar, or squeezed lemon juice.
- Put the burners in the container that you have with the hot water and leave them in for about an hour.
- Next, clean the burners with an aluminum sponge or scrubber.
- If the dirt has not been cleaned well in the first place, repeat the operation again.
Let them dry before putting them back in the kitchen so that the water does not cause a minor flame or other problems in the kitchen.
How to clean the gas furnace burner with ammonia and an airtight bag
Ammonia is also one of the quintessential chemical cleaners at home.
If you have this product in your home, you do not need to buy it. Its degreasing ability is key to cleaning kitchen burners with this simple trick.
- A hermetic or zip bag.
Steps to clean the burners of the kitchen with ammonia
- Insert four teaspoons of ammonia into the hermetic bag along with the kitchen burners.
- Remove the ammonia so it can spread over the entire surface of the burners.
- Once distributed, close the bag with the zip. If you do not have this bag, we can have just any bag and close it in the most airtight way possible.
- Let the compound act for half a day, that is, about 12 hours. In this process, the vapors that the ammonia gives off will act on the dirt within a reduced period of time.
- After this process, you have to open it. To do this, go to a well-ventilated area because it is harmful to breathe the vapors of ammonia.
- Remove the burners from the bag and wash them with cold-warm water and soap. like new, right?
How to clean the gas furnace burner with soap or cleaning powders
Another simpler way to clean the burners in the kitchen is to do it with the same dishwasher soap or cleaning powders you use every day.
This formula is like washing the dishes and the kitchenware by hand.
- Dish washing soap
- Powder cleaner (any brand)
- Hard scourer or aluminum sponge
Steps to clean the burners with dishwasher soap
- Dismantle the burner in the kitchen.
- Put them in hot water for 15 minutes so that the dirt can soften.
- Put the soap and the powder cleaning product you have chosen in the sponge and rub the burners until they are clean.
- Rinse with cold or hot water.
It’s better to prevent your burners from being heavily dirty than finding a way to clean them each time.
If you can prevent accidents arriving from carelessness in handling your cookware or the gas stove, whether by monitoring closely the preparation of these meals or not exceeding the capacity of the utensil you use, you can prevent burners from clogging and need to be cleaned so often.
If you really need to remedy the situation, these are just three of the best ways to clean a dirty glass furnace burner.
What do you think of these tricks? Have you put it into practice? Do you know any more? Leave us a comment with your thoughts on the article “How To Clean The Gas Furnace Burner“.
We hope we have helped you.
Read more: How To Tell If Your Thermostat Is Broken
Table of Contents
- 1 3 ways to deep-clean a gas furnace burner
- 2 How to clean the gas furnace burner with vinegar and baking soda
- 3 How to clean the gas furnace burner with ammonia and an airtight bag
- 4 How to clean the gas furnace burner with soap or cleaning powders
- 5 Conclusion