How to Clean the Pool Bottom without Vacuum

Most people think cleaning the pool is a simple job. And that it comes down to cleaning the surface with a sieve to remove insects, leaves and other things.

However, they end up forgetting all the rest of the cleaning work that is crucial so that your pool doesn’t get green, cloudy, etc.

Swimming pool cleaning is really a simple task, however, it’s nothing to learn overnight!

How to Clean the Pool Bottom without Vacuum
How to Clean the Pool Bottom without Vacuum

Whether you have an inground or aboveground pool, it is important to keep it clean. Here we will show you how to clean the bottom of the pool without a vacuum.

While a specialized pool vacuum facilitates the cleaning process, it is not always a practical solution, especially for elevated pools. Fortunately, it is possible to keep your pool clean without a pool vacuum. Although doing so may require a little creativity and patience.

Basically, you can clean all types of pools with the same methods. However, you should be careful to use the right brushes for the pool surface. A thick, very stiff brush, for example, might not be the best option for the pool with a soft vinyl lining. However, for vinyl pool coverings such as those in most elevated pools, the best option is a brush with softer rubber or nylon bristles.

The methods to clean your pool on the ground without a pool cleaner will vary depending on the type of dirt you have, which can be large debris, such as leaves or acorns, algae or fine particles such as sand and fatty materials, such as substances left in the water containing suntan lotions or insect repellents.

Steps to clean the bottom of a pool without Vacuum

So, let’s start with the basics, ok?

There are several steps that require the person cleaning the pool a great deal of responsibility, patience, and experience.

So let’s cut to the chase…

The first step to clean the pool bottom without vacuum

Cleaning around the pool
Cleaning around the pool

Cleaning around the pool: Before proceeding to the bottom, the first step in cleaning the pool is to clean the entire outside of the pool.

This includes the edge of the pool, the deck, and the entire surroundings of the pool.

Factors such as wind, the presence of plants and the movement of people and animals can cause a large accumulation of dirt on the outside of the pool.

So start cleaning this part, always towards the edge of the pool outwards, in order not to let the dirt fall into the pool.

In this first step, keep in mind that to clean each type of material (wood, marble, stones, etc.) there are specific products you can use.

The second step to clean the pool bottom without vacuum

Cleaning the Skimmer
Cleaning the Skimmer

Cleaning the Skimmer: Next, the second step in cleaning the pool is to clean the skimmer and the pool pump prefilter.

First, a skimmer is a device usually on the side of the pool capturing the dirt that may fall on the surface of the water.

If the pool has this device, it is necessary to empty the skimmer dirt tank manually and always keep it clean.

You have to clean the pump pre-filter as well as the skimmer manually.

Meanwhile, remember to turn off the filtration system and close the necessary registers before opening the prefilter housing!

The third step to clean the pool bottom without vacuum

Cleaning the pool surface with a sieve
Cleaning the pool surface with a sieve

Cleaning the pool surface with a sieve: Next, the third step in treating a pool is sieving. Basically, it involves cleaning the entire surface of the water.

First, with the help of a telescopic handle equipped with a leaf vane at the end, you should remove any dirt on the surface of the pool. Remove leaves, insects, twigs and all debris floating in the pool.

Even if you had a pool vacuum, it wouldn’t help you much if the floor of your pool was covered with large objects such as leaves, flower petals, acorns and other soils of large plants. To remove these items, you can also use a rake of sheets or nylon brush to put them together in a pile at the bottom of your pool and then remove the pile of debris by hand.

The fourth step to clean the pool bottom without vacuum

Sand and seaweed removal on the main surface
Sand and seaweed removal on the main surface

Sand and seaweed removal on the main surface: This step is to prevent the formation of stains and the accumulation of algae, fungi, and bacteria on the pool surfaces, for instance, the walls and bottom.

First, how algae that discolor water or fine sand particles are removed will depend on whether the pool has a mechanical filtration system or not.

However, sand, algae and other small debris particles are easy to remove if your pool has a filter. First, clean the filter thoroughly and make sure it is in good working order. If so, turn off the filter and then brush the sides of your pool. Basically, this helps to remove the algae or waste that is deposited there. To brush the pool, use only soft brushes. Basically, nylon bristle brushes are safe for vinyl pool coverings. No matter what your pool coat is, whether it is tile, vinyl, fiber, epoxy paint, stones, wood, it doesn’t matter!

Also, a plastic rake is good for this task, as it will not scratch the surface of the pool.

While a large pool brush makes work quick, you may need a smaller brush to clean the corners. So, once you have removed the particles from the sides of the pool, turn on the filter again and stir the water.

However, never use a stainless steel or metal vinyl brush. These are suitable only for concrete pools. Basically, a nylon or rubber brush is the right choice to scrub the sides of a soft surface aboveground pool.

Meanwhile, if the waste is completely organic, you can take it to the local garden waste recycling center. However, if not, pack it and dispose of it with the regular trash.

The fifth step to clean the pool bottom without vacuum

Oil removal with a tennis ball
Oil removal with a tennis ball

Oil removal with a tennis ball: In both elevated and surface pools, swimmers themselves are a source of debris and stains. Basically, grease stains and debris are the results of suntan lotions, insect repellents, and natural skin oils. These are left by people who use them in the pool.

Fortunately, removing excess oily waste in your pool is easy. Just throw some tennis balls in your pool and let them float. The felt in the balls will absorb the oil. So when the balls begin to look dirty, just pick them, dispose of them and replace them.

In addition, you can use a garden hose to clean your pool. Learn the tricks with this video:

How to remove the green from the pool walls?

How to remove the green from the pool walls
How to remove the green from the pool walls

First, if your pool lacks a filter or is too dirty for the filter to handle the mess, removing small debris from your pool requires a little more work. However, when you have a pool filter, the first step is to brush the sides of the pool to remove particles of algae and other small debris. Then, you will have to slowly sweep the debris at the bottom of the pool in a pile. Meanwhile, slow movements are key during this process so you don’t make waves that will extend the sand again.

So once you have the sand in a pile, immerse yourself in the bottom of the pool. Then gently collect it in a dustpan. While returning to the surface, you can pour it into a bucket for disposal.

However, if you have a large pool, you can try to glue a hose to a portable wet/dry vacuum and use it to clean the pool floor. Keep in mind, however, that the vacuum will fill with water quickly. And now, you will have to empty it frequently. Meanwhile, for best results, sweep the sand into a pile. And then use the vacuum to remove it, instead of trying to vacuum the entire floor of the pool.

Remember that when used to vacuum water, you should remove the dust filter inside the vacuum. Generally, standard hoses in portable vacuum cleaners not long enough to reach the bottom of a pool. So you must attach an extension.


It is often said that a few grams of prevention are worth more than a kilo of cure. And this applies to pool maintenance.

While you now know how to clean your pool manually, you can still facilitate the work by limiting the amount of debris collected by the pool. However, always keep your pool cover on when not in use.

But beware of dirty covers. First, before removing the cover, quickly remove any residue or use a leaf blower to remove it. Basically, this ensures that you do not accidentally release more debris in your pool when you discover it.

So, we hope you have discovered manual ways to clean the bottom of your pool without vacuum. Finally, kindly let us know in the comment section what your thoughts about the tutorial are. Don’t forget to like and share the article.

Read more:

How To Remove Melted Plastic From Glass Stove Top

How To Backwash A Pool With A Cartridge Filter

How to Get Rid of Water Bugs

How To Drain Water From Pool After Rain